Installation Conditions Of Compressors

- Nov 01, 2017 -

The installation of the compressor shall comply with the relevant laws and regulations of the local, and strictly eligible abide by the following provisions:

1. The compressor should use load-bearing capacity is larger than the weight of the lifting equipment for hoisting, lifting speed, acceleration should be limited within the scope of the license.

2. Try to install the compressor in a cool, clean, well-ventilated place, to ensure that the air compressor inhalation of clean and moisture content of the smallest.

3. The air inhaled by the compressor is not allowed to contain flammable gases and corrosive gases, lest it may cause explosions or internal corrosion.

4. Wind-cooled machine should preferably have a fan or air duct to export hot air outside, to avoid heat | test | big | wind cycle to inlet.

5. Compressor sewage, waste oil emissions should comply with the local Environmental Protection Department regulations.

6. The machine used for three-phase AC power 380V, 50Hz, guide the compressor power supply line must match its power and installation of air switches, fuse and other safety devices, in order to ensure the reliable safety of electrical equipment, must be reliable grounding.

Related Products